Order Products : sales@su-jiao.com

Marlex® 1007

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	Marlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	dsmDoZ_Marlex-1007.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Marlex® 1007 is a Low Density Polyethylene material. It is available in Latin America or North America for injection molding.

Important attributes of Marlex® 1007 are:

Food Contact Acceptable

Good Flexibility

Homopolymer

Sterilizable

Warp Resistant

Typical applications include:

Automotive

Caps/Lids/Closures

Food Contact Applications

Household Applications

General Information
Features	Autoclavable Food Contact Acceptable Good Flexibility Good Flow Homopolymer Low Warpage
Uses	Caps Household Goods
Agency Ratings	ASTM D 4976-PE113 FDA 21 CFR 177.1520(c) 2.2
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.917	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	7.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Compression Molded)	47		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	9.00	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	600	%	ASTM D638
Flexural Modulus - Tangent ³(Compression Molded)	200	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-66.0	°C	ASTM D746A
Vicat Softening Temperature	87.0	°C	ASTM D1525 ⁴

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min
3 .	13 mm/min
4 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
RTP 2700 S-60A	RTP Company	SEBS	RTP
YUPLENE® H231P	SK Global Chemical	PP Homopolymer	YUPLENE®
4LOY® 25E17200	4Plas	PC+ABS	4LOY®
Ebalta MG 454 / Comp. A+B	Ebalta Kunststoff GmbH	PUR, Unspecified	Ebalta
EMOPLEN® A 830 T15	EMAS Plastik San.Tic.AS.	PP, Unspecified	EMOPLEN®