Order Products : sales@su-jiao.com
Stanyl® Diablo OCD2100 BK27021
| Category: | Nylon 46 , Polyamide 46 |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Stanyl® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ds03ux_Stanyl-Diablo-OCD2100-BK27021.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Stanyl® Diablo OCD2100 BK27021 is a Polyamide 46 (Nylon 46) material filled with 40% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary attribute of Stanyl® Diablo OCD2100 BK27021: Heat Stabilizer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.48 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 1.0 | -- | % | |
| Flow | 0.50 | -- | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 2.2 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | ISO 527-2 | |||
| -- | 13000 | 7000 | MPa | |
| 120°C | 5000 | -- | MPa | |
| 160°C | 4600 | -- | MPa | |
| 180°C | 4200 | -- | MPa | |
| 200°C | 3400 | -- | MPa | |
| Tensile Stress | ISO 527-2 | |||
| Break | 210 | 125 | MPa | |
| Break, 120°C | 100 | -- | MPa | |
| Break, 160°C | 85.0 | -- | MPa | |
| Break, 180°C | 75.0 | -- | MPa | |
| Break, 200°C | 60.0 | -- | MPa | |
| Tensile Strain | ISO 527-2 | |||
| Break | 3.0 | 8.0 | % | |
| Break, 120°C | 10 | -- | % | |
| Break, 160°C | 11 | -- | % | |
| Break, 180°C | 12 | -- | % | |
| Break, 200°C | 13 | -- | % | |
| Flexural Modulus | ISO 178 | |||
| -- | 13000 | 7000 | MPa | |
| 120°C | 5000 | -- | MPa | |
| 160°C | 4600 | -- | MPa | |
| 180°C | 4200 | -- | MPa | |
| 200°C | 3400 | -- | MPa |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 12 | 12 | kJ/m² | |
| 23°C | 15 | 25 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 65 | 75 | kJ/m² | |
| 23°C | 90 | 110 | kJ/m² | |
| Notched Izod Impact Strength (23°C) | 15 | 25 | kJ/m² | ISO 180/1A |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 256 | -- | °C | ISO 75-2/A |
| Melting Temperature | 282 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow | 2.5E-5 | -- | cm/cm/°C | |
| Transverse | 5.0E-5 | -- | cm/cm/°C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Comparative Tracking Index | 300 | -- | V | IEC 60112 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Rear Temperature | 270 to 290 | °C | |
| Middle Temperature | 280 to 300 | °C | |
| Front Temperature | 295 to 305 | °C | |
| Nozzle Temperature | 280 to 300 | °C | |
| Processing (Melt) Temp | 295 to 305 | °C | |
| Mold Temperature | 80.0 to 120 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 2.00 to 10.0 | MPa | |
| Screw Compression Ratio | 2.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® S RV300 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| 4LEX® 10F23100 | 4Plas | PC | 4LEX® |
| DENISTAT N 00U 03 | Vamp Tech | Nylon 6 | DENISTAT |
| Fainplast PVC FK 70/1 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Generic HDPE, HMW | Generic | HDPE, HMW | Generic |
