Order Products : sales@su-jiao.com
Starglas FF006
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Eurostar Engineering Plastics |
| Trademark: | Starglas |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dqGuib_Starglas-FF006.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Starglas FF006 is a Glass Fiber Reinforced High Density Polyethylene Resin (also known as Starglas PE HE 30V) |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (4.00 mm) | 0.30 to 0.50 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5800 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 55.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.0 | % | ISO 527-2 |
| Flexural Modulus | 4500 | MPa | ISO 178 |
| Flexural Stress | 77.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength 1(23°C) | 7.0 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 2(23°C) | 35 | kJ/m² | ISO 180/1U |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 170 to 200 | °C | |
| Middle Temperature | 170 to 200 | °C | |
| Front Temperature | 170 to 200 | °C | |
| Processing (Melt) Temp | 190 | °C | |
| Mold Temperature | 40.0 to 55.0 | °C |
| Note Message | |
|---|---|
| 1 . | 80*10*4 |
| 2 . | 80*10*4 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unichem 8034 | Colorite Polymers | PVC, Unspecified | Unichem |
| Ad-Tech Epoxy EL-325-HTTC | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Asiga® PlasWHITE | Asiga | Unspecified | Asiga® |
| ESTOPLAST XU 230BB11 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
| LNP™ LUBRICOMP™ IFL36 compound | SABIC Innovative Plastics | Nylon 612 | LNP™ LUBRICOMP™ |
