Order Products : sales@su-jiao.com
WELLAMID Nylon 6000 SCP
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | CP-Polymer-Technik GmbH & Co. KG |
| Trademark: | WELLAMID Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dqGbNA_WELLAMID-Nylon-6000-SCP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WELLAMID Nylon 6000 SCP is a Polyamide 6 (Nylon 6) material. It is available in Europe. Important attributes of WELLAMID Nylon 6000 SCP are:
Typical application of WELLAMID Nylon 6000 SCP: Automotive |
| General Information | |
|---|---|
| Features |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.14 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow : 4.00 mm | 0.80 to 1.2 | -- | % | |
| Flow : 4.00 mm | 0.80 to 1.2 | -- | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 2.5 to 3.3 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 3200 | 1200 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 90.0 | 60.0 | MPa | ISO 527-2/50 |
| Tensile Strain | ISO 527-2/50 | |||
| Yield | 4.0 | 20 | % | |
| Break | 20 | > 50 | % | |
| Flexural Modulus | 2700 | -- | MPa | DIN 52457 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 6.0 | 18 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | No Break | No Break | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 180 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 70.0 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | 200 | -- | °C | ISO 306/B50 |
| Melting Temperature | 215 | 70.0 | °C | |
| CLTE - Flow (23 to 80°C) | 8.5E-5 | -- | cm/cm/°C | DIN 53752 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Electric Strength | 30 | 35 | kV/mm | IEC 60243-1 |
| Relative Permittivity (1 MHz) | 3.50 | 7.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.020 | 0.30 | IEC 60250 | |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.60 mm | V-2 | -- | ||
| 3.20 mm | V-2 | -- |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 245 to 265 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C | |
| Injection Rate | Moderate-Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sicostirolo CR H 3444 | Ravago Group | PS (HIPS) | Sicostirolo |
| Niuk 40RN00 | Shanghai Niuk New Plastic Technology Co., Ltd. | Nylon 6 | Niuk |
| Amilan® CM1056K48 | Toray Resin Company | Nylon 6 | Amilan® |
| EPO-TEK® OE100-T | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| ICORENE® 9031 BA8 | ICO Polymers SA, A Division of A. Schulman | PE, Unspecified | ICORENE® |
