Order Products : sales@su-jiao.com
DuraSurf™ BSR
| Category: | UHMWPE , Ultra High Molecular Weight Polyethylene |
| Manufacturer: | Crown Plastics |
| Trademark: | DuraSurf™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dkMpXs_DuraSurf-BSR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Crown Plastics DuraSurf™ BSR tapes are specifically designed to meet the demands of the automotive industry to help eliminate Buzz, Squeak and Rattle issues with auto interiors. DuraSurf™ BSR helps eliminate wear and noise between dissimilar materials, eliminate warranty issues, allow movement in adjoining parts, protect painted surfaces, reduce marring, help extend vehicle life, is easily die-cuttable and can fit into existing designs. The DuraSurf™ BSR tapes are tested to all of the major automotive specifications including GM9985804, GM6419M, Ford ESB-M3G123-B and Chrysler MS-CH612. AVAILABLE THICKNESS .005" (.125 mm), .010" (.25 mm), .015" (.38 mm), .020" (.5 mm) AVAILABLE WIDTHS All dimensions between 1/4" (6.35 mm) and 24" (610 mm) UHMW PROPERTIES
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.930 | g/cm³ | ASTM D792 |
| Crystallinity | ASTM D3417 | ||
| 762.0 µm | 48 | % | |
| 1.52 mm | 47 | % | |
| 3.18 mm | 50 | % | |
| Relative Viscosity | ASTM D4020 | ||
| 762.0 µm | 230 to 350 | cm³/g | |
| 1.52 mm | 230 to 350 | cm³/g | |
| 3.18 mm | 230 to 350 | cm³/g |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Static Decay | |||
| 762.0 µm | < 10 | msec | |
| 1.52 mm | < 10 | msec | |
| 3.18 mm | < 10 | msec |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D, 0.762 mm | 65 | ||
| Shore D, 1.52 mm | 65 | ||
| Shore D, 3.18 mm | 65 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 0.762 mm | 725 | MPa | |
| 1.52 mm | 731 | MPa | |
| 3.18 mm | 672 | MPa | |
| Tensile Strength | ASTM D638 | ||
| Yield, 0.762 mm | 23.0 | MPa | |
| Yield, 1.52 mm | 20.0 | MPa | |
| Yield, 3.18 mm | 22.0 | MPa | |
| Break, 0.762 mm | 53.0 | MPa | |
| Break, 1.52 mm | 49.0 | MPa | |
| Break, 3.18 mm | 44.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Break, 0.762 mm | 60 | % | |
| Break, 1.52 mm | 460 | % | |
| Break, 3.18 mm | 470 | % | |
| Coefficient of Friction | ASTM D1894 | ||
| vs. Itself - Dynamic 2 | 0.14 | ||
| vs. Itself - Dynamic 3 | 0.14 | ||
| vs. Itself - Dynamic 4 | 0.13 | ||
| vs. Itself - Static 5 | 0.16 | ||
| vs. Itself - Static 6 | 0.16 | ||
| vs. Itself - Static 7 | 0.16 | ||
| vs. Steel - Dynamic 8 | 0.050 to 0.080 | ||
| vs. Steel - Dynamic 9 | 0.050 to 0.10 | ||
| vs. Steel - Dynamic 10 | 0.10 to 0.22 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 11(3.18 mm) | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | |||
| -- 12 | 134 | °C | |
| -- 13 | 136 | °C | |
| CLTE - Flow | ASTM D696 | ||
| -100 to -20°C, 3.18 mm | 9.2E-4 | cm/cm/°C | |
| 20 to 100°C, 3.18 mm | 1.5E-4 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | ||
| 0.762 mm | 1.0E+3 | ohms | |
| 1.52 mm | 1.0E+3 | ohms | |
| 3.18 mm | 1.0E+3 | ohms | |
| Volume Resistivity | ASTM D257 | ||
| 0.762 mm | 6.0E+7 | ohms·cm | |
| 1.52 mm | 1.5E+7 | ohms·cm | |
| 3.18 mm | > 2.0E+7 | ohms·cm | |
| Dielectric Strength (3.18 mm) | 14 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 0.762 mm | 2.39 | ||
| 1.52 mm | 2.29 | ||
| 3.18 mm | 2.28 | ||
| Dissipation Factor | ASTM D150 | ||
| 0.762 mm, 10 kHz | -1.0E-3 | ||
| 0.762 mm, 5 MHz | -1.0E-3 | ||
| 1.52 mm, 10 kHz | -2.0E-3 | ||
| 1.52 mm, 5 MHz | -1.0E-3 | ||
| 3.18 mm, 10 kHz | 0.0 | ||
| 3.18 mm, 5 MHz | -1.0E-3 |
| Note Message | |
|---|---|
| 1 . | 0.125 inches |
| 2 . | 0.03 inches |
| 3 . | 0.125 inches |
| 4 . | 0.06 inches |
| 5 . | 0.03 inches |
| 6 . | 0.06 inches |
| 7 . | 0.125 inches |
| 8 . | Oil |
| 9 . | Water |
| 10 . | Dry |
| 11 . | 5.0 mm Notch Depth |
| 12 . | 0.125 inches |
| 13 . | 0.03 inches |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2800B-50D | RTP Company | TPV | RTP |
| WanBlend® WHT-HF8685 | Wanhua Chemical Group Co., Ltd. | TPU-Polyether | WanBlend® |
| Edgetek™ XT X XT 1001 Natural | PolyOne Corporation | Copolyester | Edgetek™ XT |
| HOPELEX PC-1150UL | Lotte Chemical Corporation | PC | HOPELEX |
| Sylvin 9659-55 Green 3159 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
