Order Products : sales@su-jiao.com

Europrene® SOL T 6434

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Versalis S.p.A.
Trademark:	Europrene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	dgnhEC_Europrene-SOL-T-6434.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Europrene® SOL TE 6434 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene content is 40 % wt and diblock content is 45 %. A non-staining, TNPP free antioxidant system is added during the production process. Key Features Europrene® SOL TE 6434 is a high styrene, radial structure block copolymer designed for hot melt adhesive applications where an optimum balance of adhesive and cohesive properties is required, together with low melt viscosities Main Applications The polymer is designed for demanding hot melt adhesive applications.

Message

Europrene® SOL TE 6434 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene content is 40 % wt and diblock content is 45 %. A non-staining, TNPP free antioxidant system is added during the production process.

Key Features
Europrene® SOL TE 6434 is a high styrene, radial structure block copolymer designed for hot melt adhesive applications where an optimum balance of adhesive and cohesive properties is required, together with low melt viscosities

Main Applications
The polymer is designed for demanding hot melt adhesive applications.

General Information
Additive	Antioxidant
Features	Antioxidant Block Copolymer Low Viscosity
Uses	Adhesives
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.950	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	15	g/10 min	ASTM D1238
Bound Styrene	40.0	%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	87		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	3.10	MPa	ASTM D412
Tensile Strength	20.0	MPa	ASTM D412
Tensile Elongation (Break)	1000	%	ASTM D412

Fill Analysis	Nominal Value	Unit	Test Method
Brookfield Viscosity - Toluene sol., 25% wt	350	mPa·s	ASTM D1084

Additional Information	Nominal Value	Unit	Test Method
Diblock Content	45.0	wt%
Shelf Life	18	month

Resin Grade	Manufacturer	Category	Trademark
Pro-fax SB912	LyondellBasell Industries	PP Impact Copolymer	Pro-fax
Vyncolit® X620	Vyncolit N.V.	Phenolic	Vyncolit®
POLYfill PPH GF8020 PD2	Polykemi AB	PP Homopolymer	POLYfill
CYCOLOY™ CX7211 resin	SABIC Innovative Plastics	PC+ABS	CYCOLOY™
ULTEM™ 2300R resin	SABIC Innovative Plastics	PEI	ULTEM™