Order Products : sales@su-jiao.com
RTP 2740 S-45A
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dggy7Y_RTP-2740-S-45A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 2.7 - 3.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 46 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 3.20 mm) | 7.58 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 1900 | % | ASTM D412 |
| Tear Strength 3 | 17.5 | kN/m | ASTM D624 |
| Additional Information |
|---|
| Moisture Content: <0.04% |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 177 - 204 | °C | |
| Mold Temperature | 15.6 - 37.8 | °C | |
| Injection Pressure | 34.5 - 68.9 | MPa |
| Note Message | |
|---|---|
| 1 . | C mold, 500 mm/min |
| 2 . | Mouth die C, 500 mm/min |
| 3 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stat-Tech™ ST9620-0020 ES Red | PolyOne Corporation | LCP+PPS | Stat-Tech™ |
| THERMOLAST® K TF9BTL (Series: FC/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Exelene® LLDPE 2400 | Montachem International, Inc. | LLDPE | Exelene® LLDPE |
| LNP™ COLORCOMP™ J1000 compound | SABIC Innovative Plastics Europe | PESU | LNP™ COLORCOMP™ |
| LITEN BB 85 | UNIPETROL RPA | PE Copolymer | LITEN |
