Order Products : sales@su-jiao.com
CONAP® AD-7409
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONAP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dfgVm7_CONAP-AD-7409.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CONAP AD-7409 is an undiluted epoxy potting and casting resin. This system possesses low viscosity, low shrinkage, low exotherm, excellent resistance to thermal shock, good electrical properties, and hardnesses of 85 Shore D. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 0.960 | g/cm³ | |
| -- 2 | 1.15 to 1.17 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 55.8 | MPa | |
| Flexural Strength | 62.1 | MPa | |
| Compressive Strength | 93.1 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature | 85.0 to 90.0 | °C | |
| CLTE - Flow | 5.5E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.19 | W/m/K |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | 8.8E+15 | ohms | |
| Volume Resistivity (25°C) | 4.2E+15 | ohms·cm | |
| Dielectric Strength | 14 | kV/mm | |
| Dielectric Constant (25°C, 1 kHz) | 4.20 | ||
| Dissipation Factor (25°C, 1 kHz) | 0.035 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 37 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity (25°C) | 1500 | cP |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Linear Shrinkage | 0.80 | % |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ 1000R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| NEXT REGRIND PA66 ST801-300RG | NEXT Specialty Resins, Inc. | Nylon 66 | NEXT REGRIND |
| Pexidan® X/T | Saco Polymers | XLPE | Pexidan® |
| Sylvin 5175-92 White 1478 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Durethan® BKV 30 H3.0 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
