Order Products : sales@su-jiao.com
MAXNITE® PET 500 GF15
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | MRC Polymers, Inc. |
| Trademark: | MAXNITE® PET |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dd3uHg_MAXNITE-PET-500-GF15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Further information and details are available upon request. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.43 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 82.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 5860 | MPa | ASTM D790 |
| Flexural Strength | 131 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 64 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 210 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 116 - 135 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Dew Point | < -17.8 | °C | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 260 - 282 | °C | |
| Middle Temperature | 260 - 288 | °C | |
| Front Temperature | 266 - 288 | °C | |
| Nozzle Temperature | 271 - 299 | °C | |
| Processing (Melt) Temp | 271 - 293 | °C | |
| Mold Temperature | 82.2 - 104 | °C | |
| Injection Pressure | 68.9 - 138 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.345 - 1.21 | MPa | |
| Screw Speed | 20 - 50 | rpm | |
| Cushion | 6.35 | mm |
| Injection instructions |
|---|
| Packing: 50 to 75% of injection pressureHold: 40 to 60% of injection pressureAir Flow Rate: 0.8-1.0 CFM per lb/hour resin processed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TITANCEED® mL156 | Lotte Chemical Titan (M) Sdn. Bhd. | LLDPE | TITANCEED® |
| 4MID® 9B22140 HUVW | 4Plas | Nylon 6 | 4MID® |
| LG SBS LG401 | LG Chem Ltd. | SBS | LG SBS |
| LUVOCOM® 1105-7685 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| PLUSTEK PA324G6 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
