Order Products : sales@su-jiao.com
RONFALIN® 1344 FC
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | A. Schulman Europe |
| Trademark: | RONFALIN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dbblUs_RONFALIN-1344-FC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Medium impact ABS grade |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183/A |
| Melt Volume-Flow Rate (MVR) (220°C/10.0 kg) | 21.0 | cm³/10min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness (H 358/30) | 104 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2300 | MPa | ISO 527-2/1A/1 |
| Tensile Stress (Yield) | 43.0 | MPa | ISO 527-2/1A/50 |
| Tensile Strain (Yield) | 2.4 | % | ISO 527-2/1A/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 11 | kJ/m² | ISO 179/1eA |
| 23°C | 21 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | No Break | ISO 179/1eU | |
| 23°C | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 87.0 | °C | ISO 75-2/Bf |
| 1.8 MPa, not annealed | 74.0 | °C | ISO 75-2/Af |
| Vicat Softening Temperature | |||
| -- | 105 | °C | ISO 306/A50 |
| -- | 96.0 | °C | ISO 306/B50 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+13 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate (2.00 mm) | 36 | mm/min | ISO 3795 |
| Flammability Classification | IEC 60695-11-10, -20 | ||
| 1.50 mm | HB | IEC 60695-11-10, -20 | |
| 3.00 mm | HB | IEC 60695-11-10, -20 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 1.50 mm | 650 | °C | IEC 60695-2-12 |
| 3.00 mm | 650 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | ||
| 1.50 mm | 675 | °C | IEC 60695-2-13 |
| 3.00 mm | 675 | °C | IEC 60695-2-13 |
| Additional Information |
|---|
| ABS can normally be left in the cylinder. If in doubt purge with polyolefinFinishing"ABS is suitable for machining. Varnishing, printing, gluing and embossing canbe carried out using commercially available products.Electroplating is affected by rubber type and content as well moulded in stressand orientation. Use of special electroplating types is recommended foroptimum adhesion." |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Drying Time, Maximum | 12 | hr | |
| Suggested Max Moisture | 0.0 - 0.10 | % | |
| Suggested Max Regrind | 30 | % | |
| Hopper Temperature | 50.0 | °C | |
| Rear Temperature | 180 - 210 | °C | |
| Middle Temperature | 205 - 235 | °C | |
| Front Temperature | 230 - 260 | °C | |
| Processing (Melt) Temp | 230 - 260 | °C | |
| Mold Temperature | 30.0 - 80.0 | °C | |
| Back Pressure | 5.00 - 15.0 | MPa | |
| Cushion | 2.00 - 5.00 | mm | |
| Screw Speed | 500 | mm/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| StarFlex P 7370-9000 | STAR Thermoplastic Alloys & Rubbers, Inc. | TPE | Starflex |
| Cri-Line LC-715 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| LNP™ THERMOTUF™ VF008 compound | SABIC Innovative Plastics | Nylon, Unspecified | LNP™ THERMOTUF™ |
| OOMOO® 25 | Smooth-On, Inc | Silicone | OOMOO® |
| O'Tech OW 135 AWM | O'Tech Corporation | PVC, Unspecified | O'Tech |
