Order Products : sales@su-jiao.com
ISPLEN® PB 171 H
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dalIYe_ISPLEN-PB-171-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Block (or heterophasic) ethylene-propylene copolymer and high flow rate. ISPLEN® PB 171 H shows a high stiffness, even at low temperatures, as well as good processability. The product is high heat stabilised specially designed for chemical agents. TYPICAL APPLICATIONS
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | 1.8 to 2.2 | % | ISO 2577 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 23.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 7.0 | % | ISO 527-2 |
| Flexural Modulus | 1100 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| 0°C | 7.0 | kJ/m² | |
| 23°C | 20 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179 | ||
| 0°C | No Break | ||
| 23°C | No Break | ||
| Notched Izod Impact Strength | ISO 180 | ||
| -20°C | 7.0 | kJ/m² | |
| 0°C | 7.5 | kJ/m² | |
| 23°C | 40 | kJ/m² | |
| Unnotched Izod Impact Strength | ISO 180 | ||
| -20°C | 65 | kJ/m² | |
| 0°C | 80 | kJ/m² | |
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 85.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 53.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 150 | °C | ISO 306/A |
| -- | 72.0 | °C | ISO 306/B |
| Thermal Stability (150°C) | > 2 | day |
| Note Message | |
|---|---|
| 1 . | 150x100x3mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP PP M 2097-001 | Washington Penn Plastic Co. Inc. | PP Impact Copolymer | WPP PP |
| Andur AL 80-5 AP-FP/Curene® 110 | Anderson Development Company | PUR-Eth,aliphat | Andur |
| Iupilon® S-2000 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| TechnoDur PBT4 GF 10 Natural (9993) | TechnoCompound GmbH | PBT | TechnoDur |
| Kepital® ES-20 | KEP Americas | Acetal (POM) Copolymer | Kepital® |
