Order Products : sales@su-jiao.com
Badaflex® TPE-S 80A 1032
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dZqkc9_Badaflex-TPE-S-80A-1032.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Elastomer as a standard injection moulding grade based on SEBS Copolymer with improved compression set Overmoulding capability: Polypropylene (PP) |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.17 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 80 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 8.50 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 630 | % | DIN 53504 |
| Compression Set | |||
| 23°C, 72 hr | 33 | % | ISO 815 |
| 70°C, 24 hr | 56 | % | DIN 53515 |
| 100°C, 24 hr | 77 | % | DIN 53515 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 28.0 | kN/m | DIN 53515 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 220 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Clyrell RC2472 | LyondellBasell Industries | PP Random Copolymer | Clyrell |
| Electrafil® PA6/6 03002 A MB | Techmer Engineered Solutions | Nylon 66 | Electrafil® |
| En Chuan 6123TA-D | En Chuan Chemical Industries Co,. Ltd. | Polyester, TS | En Chuan |
| Lion Idemitsu Composites PPS K531A1 | Lion Idemitsu Composites Co., Ltd. | PPS | Lion Idemitsu Composites PPS |
| VALOX™ 553 resin | SABIC Innovative Plastics | PC+PBT | VALOX™ |
