Order Products : sales@su-jiao.com

FMC® 200

Category:	Polysulfide Rubber , Polysulfide Rubber
Manufacturer:	Smooth-On, Inc
Trademark:	FMC®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	dZGMg6_FMC-200.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
FMC ® -200 is a polysulfide rubber mold compound with high tear strength that cures overnight with negligible shrinkage. Molds made of FMC ® -200 are very durable and will perform in production. The mix ratio is 100 parts of Part A to 12 parts of Part B by weight. FMC ® -200 cures to a Shore hardness of 20 A. FMC ® -200 is ideal for those applications that require capturing intricate detail from a variety of model surfaces. Unlike polyurethanes, FMC ® -200 is not sensitive to moisture and can be poured directly over wet plaster or water/sulfur based clays. Common applications include molds for foundry and pattern work, sculpture (lost wax process), casting various gypsum products and waxes.

Message

FMC ® -200 is a polysulfide rubber mold compound with high tear strength that cures overnight with negligible shrinkage. Molds made of FMC ® -200 are very durable and will perform in production. The mix ratio is 100 parts of Part A to 12 parts of Part B by weight. FMC ® -200 cures to a Shore hardness of 20 A.

FMC ® -200 is ideal for those applications that require capturing intricate detail from a variety of model surfaces. Unlike polyurethanes, FMC ® -200 is not sensitive to moisture and can be poured directly over wet plaster or water/sulfur based clays. Common applications include molds for foundry and pattern work, sculpture (lost wax process), casting various gypsum products and waxes.

General Information
Features	Durable Good Tear Strength Low Shrinkage Moisture Resistant
Uses	Modeling Material Patterns
Appearance	Black
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.35	g/cm³	ASTM D792
Specific Volume	0.741	cm³/g

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio	100A:12B by weight

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	20		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	0.200	MPa	ASTM D412
Tensile Strength (Break)	1.08	MPa	ASTM D412
Tensile Elongation (Break)	700	%	ASTM D412

Thermoset	Nominal Value	Unit	Test Method
Pot Life	50	min
Thermoset Mix Viscosity	6000	cP	ASTM D2393
Demold Time (23°C)	960	min

Resin Grade	Manufacturer	Category	Trademark
New-prene™ 8080B	Total Polymer Vision (Suzhou) Co., LTD	PP+EPDM	New-prene™
Celanex® 3216HR	Celanese Corporation	PBT	Celanex®
Grilon® F 40 NL	EMS-GRIVORY	Nylon 6	Grilon®
Epocast 50-A1/946	Huntsman Advanced Materials	Epoxy	Epocast
OmniTech™ PBT GR15	OMNI Plastics, LLC	PBT	OmniTech™