Order Products : sales@su-jiao.com
THERMOLAST® K TC8PAZ (Series: AD/PA)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | THERMOLAST® K |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dYo5eq_THERMOLAST-K-TC8PAZ-Series-AD-PA-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The AD/PA Series is your material solution for applications with excellent adhesion to PA. The compounds are available in natural and black colors. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 80 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 5.50 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 350 | % | ISO 37 |
| Tear Strength 3 | 27 | kN/m | ISO 34-1 |
| Compression Set 4 | ISO 815 | ||
| 23°C, 72 hr | 38 | % | |
| 70°C, 24 hr | 80 | % | |
| 100°C, 24 hr | 80 | % |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Adhesion to PA6 | 23.5 | kN/m | Renault D41/1916 |
| Adhesion to PA66 | 16.0 | kN/m | Renault D41/1916 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 230 to 245 | °C | |
| Middle Temperature | 250 to 260 | °C | |
| Front Temperature | 260 to 270 | °C | |
| Mold Temperature | 40.0 to 60.0 | °C | |
| Injection Pressure | 20.0 to 100 | MPa | |
| Back Pressure | 2.00 to 10.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | Method Bb, Angle (Nicked) |
| 4 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® RG-17279 BLK 9004 | Teknor Apex Company | TPE | Monprene® |
| Ultrason® E Dimension E1010 G9 | BASF Corporation | PESU | Ultrason® E |
| Formolene® E927ND | Formosa Plastics Corporation, U.S.A. | HDPE, HMW | Formolene® |
| Garaflex™ O 9949RA NATURAL | AlphaGary | TPE | Garaflex™ O |
| ICORENE® N9907 | ICO Polymers EMEA, A Division of A. Schulman | PVC, Unspecified | ICORENE® |
