Order Products : sales@su-jiao.com
Premi-Glas® 1206 LD
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Premix, Inc. |
| Trademark: | Premi-Glas® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dXnCpO_Premi-Glas-1206-LD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premi-Glas® 1206 LD is a fiberglass reinforced thermoset sheet molding compound for transportation or structural and semi-structural applications were good surface appearance, high strength, and durability are required in a low density composite. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.025 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 8500 | MPa | ASTM D638 |
| Tensile Strength | 100 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.9 | % | ASTM D638 |
| Flexural Modulus | 8000 | MPa | ASTM D790 |
| Flexural Strength | 220 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 1100 | J/m | ASTM D256 |
| Unnotched Izod Impact | 1500 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 150 | °C | |
| Injection Pressure | 3.50 to 6.50 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ferro PP TPP20AD59HB-NA | Ferro Corporation | PP Homopolymer | Ferro PP |
| Ferro PP WPP10SD02NA | Ferro Corporation | PP, Unspecified | Ferro PP |
| Elastollan® C 85 A HPM | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| HiFill FR® PA6 GF33 FR-NR | Techmer Engineered Solutions | Nylon 66 | HiFill FR® |
| Ipethene® 210 | Carmel Olefins Ltd. | LDPE | Ipethene® |
