Order Products : sales@su-jiao.com
FRAGOM GR/22 PP
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dXZPGf_FRAGOM-GR-22-PP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM is the trade-mark of our flame retardant polyolefin thermoplastic compounds. FRAGOM G GR/22 PP is a flame retardant partially crosslilnked thermoplastic compound having good oxygen index, suitable for automotive cable insulation and for low voltage application, insulation and jacketing. To use with our CATALYST GETILAN MAC/203 HS or MAC/203 HSL (less reactive) at 1-3%. Exercise temperature - 40 to +125 °C Certify: ISO 6722 Class C,FIAT 7.Z8220 T3 -T3 S,SAE J1127/J1128, LV112 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 58 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 14.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 300 | % | IEC 60811 |
| Aging | Nominal Value | ||
|---|---|---|---|
| Heat Aging | |||
| 1 hr, on Mandrel : 175°C | No Crack | ||
| 6 hr : 175°C | No Crack |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Set 1 | IEC 60811 | ||
| 200°C | 70 | % | |
| Residual Value : 200°C | 0.0 | % | |
| Service Temperature | -40 to 125 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | < 12 | % | IEC 60754-1 |
| Oxygen Index | 25 | % | ISO 4589-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 100 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 210 | °C | |
| Cylinder Zone 4 Temp. | 220 | °C | |
| Cylinder Zone 5 Temp. | 225 | °C | |
| Die Temperature | 240 | °C |
| Note Message | |
|---|---|
| 1 . | 20 N/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 4MID® 9A22125 HFRR1 | 4Plas | Nylon 66 | 4MID® |
| Ferro PP NPP99GB02AL | Ferro Corporation | PP, Unspecified | Ferro PP |
| Dryflex® 4058 | ELASTO | TPE | Dryflex® |
| EPO-TEK® TV2001 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| POLYCOMPO PE SP2040 | POLYCOMPO Co.,Ltd. | LLDPE | POLYCOMPO PE |
