Order Products : sales@su-jiao.com
EVICOM™ GH1/119
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | INEOS Compounds |
| Trademark: | EVICOM™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dVoy2X_EVICOM-GH1-119.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EVICOM™ GH1/119 is a Flexible Polyvinyl Chloride material. It is available in Europe for extrusion. Important attributes of EVICOM™ GH1/119 are:
Typical application of EVICOM™ GH1/119: Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.36 | g/cm³ | BS 2782 620A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 92 | BS 2782 365B | |
| BS Softness | 18 | BS 2782 365A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Bend | -30 | °C | BS 2782 151A |
| Cold Flexibility | -13 | °C | BS 2782 150B |
| Heat Stability (200°C) | 6.7 | hr | BS EN 60811-3-3.2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance Constant - K-value (23°C) | 920 | Mohms·km |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Loss of Mass - 14 days (115°C) | 0.600 | mg/cm² | BS EN 60811-3-3.2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 18.2 | MPa | BS EN 60811-1-1.1 |
| Tensile Strain (Break) | 250 | % | BS EN 60811-1-1.1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (135°C, 336 hr) | 6.0 | % | BS EN 60811-1-1.2 |
| Change in Tensile Strain at Break in Air (135°C, 336 hr) | 20 | % | BS EN 60811-1-1.2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.5E+14 | ohms·cm | BS 2782 230A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PPcompound 7575 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| Smoothblend® PC-1301 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PC | Smoothblend® |
| Niche PCABSN10BK | Niche Polymer, LLC | PC+ABS | Niche |
| TOTAL Polyethylene Lumicene® M 5220 (Blow Molding) | TOTAL Refining & Chemicals | mHDPE | TOTAL Polyethylene |
| Moplen HP600R | PolyMirae | PP Homopolymer | Moplen |
