Order Products : sales@su-jiao.com
Formolene® L62022B
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dSbznR_Formolene-L62022B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® L62022B is a linear low density grade made using gas-phase technology. The resin is designed for use in the core layer of a multi-layer stretch film application. Formolene® L62022B meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Fracture | 44.8 | MPa | ASTM D882 |
| TD : Fracture | 34.5 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 500 | % | ASTM D882 |
| TD : Fracture | 920 | % | ASTM D882 |
| Dart Drop Impact | 93 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 300 | g | ASTM D1922 |
| TD | 630 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 98 | ASTM D523 | |
| Haze | 1.7 | % | ASTM D1003 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Cast Film Extrusion | |||
| Note: Film Properties measured on 20 micron cast film extruded at 1,000 ft/min. with a melt temperature at 510°F. Actual film properties may vary depending on operating conditions and additive packages. Film properties are not intended to be used as spe |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumikon® PM-6430 (Injection) | Sumitomo Bakelite North America, Inc. | Phenolic | Sumikon® |
| Ablebond 77-2LTC | Henkel Ablestik | Epoxy | Ablebond |
| DIOSHY® HG-795-10-4 | DIOSHY Co.,Ltd. | SEBS | DIOSHY® |
| Flontech® FT-CAF30-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Grivory® G4V-5H nat | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
