Order Products : sales@su-jiao.com
POLYblend PC/ABS 65 M10
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Polykemi AB |
| Trademark: | POLYblend |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dQkPrN_POLYblend-PC-ABS-65-M10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PC/ABS-blend Reinforced |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 25 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 48.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 110 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 3900 | MPa | ISO 178 |
| Flexural Stress | 85.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -20°C | 7.5 | kJ/m² | |
| 23°C | 32 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1 | |||
| 0.45 MPa, Unannealed | 125 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 98.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 110 | °C | ISO 306/B50 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 120°C/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE FI1157 | Saudi Basic Industries Corporation (SABIC) | HDPE, HMW | SABIC® HDPE |
| Sindustris ABS LAF453 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| TYNE® ABS CBE 75 | Tyne Plastics LLC. | ABS | TYNE® ABS |
| EnCom GF PC-Polyester 1250 | EnCom, Inc. | PC+Polyester | EnCom |
| ALTECH® ABS A 1000/106 GY2093-07LS | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
