Order Products : sales@su-jiao.com
Lucky Enpla LGF6300
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Lucky Enpla Co LTD |
| Trademark: | Lucky Enpla |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dPbLEd_Lucky-Enpla-LGF6300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lucky Enpla LGF6300 is a polypropylene product that contains 30% glass fiber reinforced materials. It can be processed by injection molding and is available in North America, Europe or the Asia-Pacific region. Lucky Enpla LGF6300 applications include electrical/electronic applications and the automotive industry. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 - 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 79.4 | MPa | ASTM D638 |
| Flexural Modulus 2 | 4900 | MPa | ASTM D790 |
| Flexural Strength 3 | 108 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (6.35 mm) | 78 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 153 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 - 90.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Rear Temperature | 200 - 220 | °C | |
| Middle Temperature | 210 - 230 | °C | |
| Front Temperature | 210 - 230 | °C | |
| Nozzle Temperature | 220 - 240 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Back Pressure | 0.490 - 1.47 | MPa | |
| Screw Speed | 40 - 70 | rpm |
| Injection instructions |
|---|
| Resin Temperature: 210-230°CInjection Pressure (1st Pressure): 500-800 kg/cm²Injection Pressure (2nd Pressure): 300-600 kg/cm² |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 30 mm/min |
| 3 . | 30 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 K TFE 15 | RTP Company | PARA | RTP |
| VITAMIDE® AM10BK6734 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| BRALEN® FB 08-65 | Slovnaft Petrochemicals, s.r.o. | LDPE | BRALEN® |
| Hiprolon® 11 ESNNHL P20 | Arkema | Nylon 1012 | Hiprolon® |
| MAJORIS GFRH210 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
