Order Products : sales@su-jiao.com
Wanthane® WHT-1295
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Wanhua Chemical Group Co., Ltd. |
| Trademark: | Wanthane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dLa04N_Wanthane-WHT-1295.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WHT-1295 is economical polyester-based TPU for injection molding and extrusion applications, supplied in form of transparent, translucent, colorless or slightly yellowish pellets with Good strength resilience Applications: Air Tube, Injection part. etc |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.21 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 96 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 12.0 | MPa | |
| 300% Strain | 20.0 | MPa | |
| Tensile Strength | 32.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 450 | % | ASTM D412 |
| Tear Strength | 140 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -20.0 | °C | ASTM D3417 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 100 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Rear Temperature | 190 | °C | |
| Middle Temperature | 200 | °C | |
| Front Temperature | 205 | °C | |
| Nozzle Temperature | 210 | °C | |
| Injection Pressure | 70.0 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 100 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 3 Temp. | 200 | °C | |
| Cylinder Zone 5 Temp. | 205 | °C | |
| Die Temperature | 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES J-4/30/V0 RD6922 | Techmer Engineered Solutions | Nylon 612 | TES |
| UBESTA 3030 JLX1 | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| XANTAR® MX 1002 | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| INELEC PEASFC | Infinity LTL Engineered Compounds | PE, Unspecified | INELEC |
| MAJ'ECO DP364MBS | AD majoris | Biodeg Polymers | MAJ'ECO |
