Order Products : sales@su-jiao.com
Alpha PVC GM 5065 NATURAL
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dIkIqA_Alpha-PVC-GM-5065-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A 105°C RATED, LEAD & CADMIUM FREE, UL-94 V-2 MOLDING COMPOUND |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 - 1.32 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 65 - 77 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (1.02 mm) | 10.3 | MPa | ASTM D412 |
| Tensile Elongation (Break, 1.02 mm) | 300 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1(136°C, 168 hr) | -20 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2(136°C, 168 hr) | -20 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -27.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.02 mm) | V-2 | UL 94 | |
| Oxygen Index (3.18 mm) | 25 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 149 | °C | |
| Middle Temperature | 154 | °C | |
| Front Temperature | 160 | °C | |
| Nozzle Temperature | 171 | °C | |
| Processing (Melt) Temp | 160 - 171 | °C |
| Injection instructions |
|---|
| Zone 4: 330°FZone 5: 330°FMaterial should not sit stagnant for prolong periods of time. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 2 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 160 | °C | |
| Cylinder Zone 4 Temp. | 166 | °C | |
| Cylinder Zone 5 Temp. | 166 | °C | |
| Adapter Temperature | 166 | °C | |
| Melt Temperature | 160 - 171 | °C |
| Extrusion instructions |
|---|
| Material should not sit stagnant for prolong periods of time. |
| Note Message | |
|---|---|
| 1 . | Thickness: 40 mil |
| 2 . | Thickness: 40 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A RV250LW 333 NER 4807 | Radici Plastics | Nylon 66 | Radilon® |
| Mediprene® 500650M | ELASTO | SEBS | Mediprene® |
| DOW™ LDPE 305E | The Dow Chemical Company | LDPE | DOW™ LDPE |
| Nyloi A2 GF/15 TF NATURALE | SO.F.TER. SPA | Nylon 66 | Nyloi |
| 4PROP® 9C12420 IUV | 4Plas | PP Copolymer | 4PROP® |
