Order Products : sales@su-jiao.com
EMERGE™ PC/ABS 7760
| Category: | PC+ABS , Advanced Resin |
| Manufacturer: | Trinseo |
| Trademark: | EMERGE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dIgG7t_EMERGEPCABS7760.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EMERGE™ PC/ABS 7760 is an ignition-resistant PC/ABS blend that contains no chlorine or bromine additives. This product provides outstanding toughness and impact strength for extrusion applications. EMERGE™ PC/ABS 7760 is available in custom colors. Main Characteristics:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 230°C/3.8 kg | 3.0 | g/10 min | ASTM D1238 |
| 260°C/5.0 kg | 14 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 - 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 3.20 mm, Injection Molded) | 121 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (3.20 mm, Injection Molded) | 2780 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, 3.20mm, injection molding | 67.0 | MPa | ASTM D638 |
| Fracture, 3.20mm, injection molding | 62.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 3.20mm, injection molding | 5.0 | % | ASTM D638 |
| Fracture, 3.20mm, injection molding | 71 | % | ASTM D638 |
| Flexural Modulus (3.20 mm, Injection Molded) | 2560 | MPa | ASTM D790 |
| Flexural Strength (3.20 mm, Injection Molded) | 104 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.20mm, injection molding | 130 | J/m | ASTM D256 |
| 0°C, 3.20mm, injection molding | 350 | J/m | ASTM D256 |
| 23°C, 3.20mm, injection molding | 740 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 98.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 86.0 | °C | ASTM D648 |
| Vicat Softening Temperature | |||
| -- | 114 | °C | ASTM D1525 1 |
| -- | 104 | °C | ASTM D1525 2 |
| Linear thermal expansion coefficient | ASTM D696 | ||
| Flow : -40 to 180°C | 7.3E-5 | cm/cm/°C | ASTM D696 |
| Horizontal : -40 to 180°C | 6.7E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.5 mm 3 | V-0 | UL 94 | |
| 2.0 mm 4 | 5VB | UL 94 | |
| 2.5 mm 5 | 5VA | UL 94 | |
| Oxygen Index | 33 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | 标准 B (120°C/h), 压 力1 (10N) |
| 2 . | 速率 A (50°C/h), 载荷2 (50N) |
| 3 . | This rating is not intended to reflect the danger caused by this or any other material under actual fire conditions. |
| 4 . | This rating is not intended to reflect the danger caused by this or any other material under actual fire conditions. |
| 5 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Yuyao PP PP Toughening | Yuyao Tenglong Plastics Co., Ltd. | PP, Unspecified | Yuyao PP |
| Blendfor® A 8000/V0 NATURALE | SO.F.TER. SPA | PC+ABS | Blendfor® |
| Exceed™ 2718CB | ExxonMobil Chemical | mPE | Exceed™ |
| Sylvin 8225-70 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| PENTAMID AB S GV30 H natural | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
