Order Products : sales@su-jiao.com
TECHNYL® A 31T1 MZ40 GREY 174 N
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Solvay Engineering Plastics |
| Trademark: | TECHNYL® A |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dH2E4F_TECHNYL-A-31T1-MZ40-GREY-174-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Flame retardant polyamide PA66, 40% mineral filled, heat stabilised, for injection moulding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Part Marking Code (ISO 11469) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.67 | -- | g/cm³ | ISO 1183/A |
| Water Absorption (23°C, 24 hr) | 0.43 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 6900 | 4000 | MPa | ISO 527-2/1A |
| Tensile Stress (Break) | 77.0 | 47.0 | MPa | ISO 527-2/1A |
| Tensile Strain (Break) | 1.7 | 6.9 | % | ISO 527-2/1A |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 2.2 | -- | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 25 | -- | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 120 | -- | °C | ISO 75-2/Af |
| Melting Temperature | 263 | -- | °C | ISO 11357-3 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Electric Strength | 30 | 30 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index (Solution A) | 400 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | V-2 | -- | UL 94 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | |||
| 0.800 mm | 960 | -- | °C | |
| 1.60 mm | 960 | -- | °C | |
| 3.20 mm | 960 | -- | °C | |
| Oxygen Index | 47 | -- | % | ISO 4589-2 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 270 to 275 | °C | |
| Middle Temperature | 280 to 285 | °C | |
| Front Temperature | 285 to 290 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen EP318R | PolyMirae | PP Copolymer | Moplen |
| Trexprene® A88CW | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| Delta PPR-1CG20 | Delta Polymers | PP Homopolymer | Delta |
| DIAMALOY ABSPC 7000M | Network Polymers, Inc. | PC+ABS | DIAMALOY ABSPC |
| Elastron® G G400.A12.N | Elastron USA, Inc. | SEBS | Elastron® G |
