Order Products : sales@su-jiao.com
ECO-FLEX™ SA-85A
| Category: | RTPV , Thermoplastic Vulcanizate, Rubber Based |
| Manufacturer: | SYNESIS LLC |
| Trademark: | ECO-FLEX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dG32tS_ECO-FLEX-SA-85A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ECO-FLEX™ SA-85A is a Thermoplastic Vulcanizate, Rubber Based (RTPV) product. It is available in North America. Applications of ECO-FLEX™ SA-85A include additive/masterbatch, automotive, consumer goods and sheet. Primary characteristic: eco-friendly/green. |
| General Information | |
|---|---|
| Recycled Content |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.980 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 85 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 5.50 | MPa | ISO 37 |
| Tensile Stress 2(Yield) | 7.90 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 430 | % | ISO 37 |
| Tear Strength 4 | 40 | kN/m | ISO 34-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 1008 hr) | 8.0 | % | ISO 188 |
| Change in Tensile Strain at Break in Air (100°C, 1008 hr) | -17 | % | ISO 188 |
| Change in Shore Hardness in Air (100°C, 1008 hr) | 1.0 | ISO 188 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -40.0 | °C | ISO 812 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | 32 | mm/min | SAE J369 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Ozone Resistance 5 | Pass - No Cracking | ISO 1431-1 |
| Note Message | |
|---|---|
| 1 . | Type 1, 50 mm/min |
| 2 . | Type 1, 50 mm/min |
| 3 . | Type 1, 50 mm/min |
| 4 . | Method Bb, Angle (Nicked), 50 mm/min |
| 5 . | Procedure A, 20% Elongation, 51 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ 2300R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| NuSil R-2180 | NuSil Technology | Silicone | NuSil |
| Clariant Nylon 6/6 PA-111G33 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| GPP™ 1001V0F | S&E Specialty Polymers, LLC | TPO (POE) | GPP™ |
| ISPLEN® PR 210 X6E | REPSOL | PP Random Copolymer | ISPLEN® |
