Order Products : sales@su-jiao.com
Andur 3300 AS/Curative
| Category: | PUR-TDI , Polyurethane (TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dFnrss_Andur-3300-AS-Curative.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Andur 3300-AS is a two-component liquid urethane system which can be processed at room temperature to yield an elastomer with a hardness of 25 to 35 Shore A. Andur 3300-AS is recommended where ease of processing is desired. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 30 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 1.38 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Compression Set | 0.0 | % | ASTM D395B |
| Bayshore Resilience | 48 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life | 3.0 - 5.0 | min | |
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 50.0 | cP | ASTM D2393 |
| 100°C | 30.0 | cP | ASTM D2393 |
| Demold Time (22°C) | 15 | min | |
| Post Cure Time (100°C) | 6.0 | hr |
| Additional Information |
|---|
| Specific Gravity, ASTM D792, 77°F: 1.01 g/mlSpecific Gravity, ASTM D792, 212°F: 0.97 g/mlDurometer Hardness, ASTM D2240, Shore A: 25 to 35Die C Tear, ASTM D1004: 50 pliAverage Split Tear, ASTM D1938: 16 pliMixing Ratio: 1 to 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3870 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Ecobarrier® 0625 | Noble Polymers | Polyolefin, Unspecified | Ecobarrier® |
| Enviramid® N1340MHL BK | Ravago Manufacturing Americas, LLC | Nylon 66 | Enviramid® |
| OP - PEI 10GF | Oxford Polymers | PEI | OP - PEI |
| Sylvin 6248-80 Yellow 4177 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
