Order Products : sales@su-jiao.com

ISPLEN® PB 181 N2M

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	dELN5r_ISPLEN-PB-181-N2M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PB 181 N2M is a high fluidity heterophasic copolymer characterised by its good balance of stiffness and impact properties. Due to the nucleating agents it contains, PB181N2M has high stiffness. In addition, the grade shows good impact properties and good processability. ISPLEN® PB181N2M is formulated with a specific additivation to facilitate the dispersion of static charges accumulated on the article surface and avoid anaesthetic dust patterns during storage or exhibition. Among other technical advantages ISPLEN® PB 181 N2M offer: Highly suitable for manufacturing of articles with good impact properties and a high melt flow rate. Easy flow enables to fill moulds with complex geometry or big articles. Low warpage and high dimensional stability. TYPICAL APPLICATIONS ISPLEN® PB 181 N2M characteristics perform a grade particularly designed for applications which main requirement is a good balance between mechanical properties and where good impact properties are needed in a grade of high melt flow rate. Some examples of these applications could be: pails and lids, technical components and containers as heavy duty crates, suitcase shells, professional organizers and automotive components. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PB 181 N2M is a high fluidity heterophasic copolymer characterised by its good balance of stiffness and impact properties. Due to the nucleating agents it contains, PB181N2M has high stiffness. In addition, the grade shows good impact properties and good processability. ISPLEN® PB181N2M is formulated with a specific additivation to facilitate the dispersion of static charges accumulated on the article surface and avoid anaesthetic dust patterns during storage or exhibition.

Among other technical advantages ISPLEN® PB 181 N2M offer:

Highly suitable for manufacturing of articles with good impact properties and a high melt flow rate.

Easy flow enables to fill moulds with complex geometry or big articles.

Low warpage and high dimensional stability.

TYPICAL APPLICATIONS
ISPLEN® PB 181 N2M characteristics perform a grade particularly designed for applications which main requirement is a good balance between mechanical properties and where good impact properties are needed in a grade of high melt flow rate. Some examples of these applications could be: pails and lids, technical components and containers as heavy duty crates, suitcase shells, professional organizers and automotive components.

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Additive	Antistatic Nucleating Agent
Features	Antistatic Food Contact Acceptable Good Dimensional Stability Good Impact Resistance Good Moldability Good Processability High Flow High Stiffness Low Warpage Nucleated
Uses	Automotive Applications Containers Crates Engineering Parts Lids Luggage Pails
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	25	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	60		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1250	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	8.0	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	89.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
Sindustris PC GN1007FMR	Sincerity Australia Pty Ltd.	PC	Sindustris PC
THERMOLAST® K TC5SCE (Series: SCR)	KRAIBURG TPE	TPE	THERMOLAST® K
Ultramid® B3UG4	BASF Corporation	Nylon 6	Ultramid®
ADENE BCZB	A.D. Compound spa	PP Homopolymer	ADENE
Akulon® CO-KGV4 /A JN.00.86	DSM Engineering Plastics	Nylon 6	Akulon®