Order Products : sales@su-jiao.com
KRATON® D1193 P
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dApLyG_KRATON-D1193-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below.
Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 14 | g/10 min | |
| Antioxidant Additive | 0.080 to 0.30 | % | Internal Method |
| Ash Content - T, Talc | 0.15 to 0.35 | % | Internal Method |
| Polystyrene Content | 23 to 26 | % | Internal Method |
| Solution Viscosity - Toluene, 25%wt (25°C) | 400 | mPa·s | Internal Method |
| Total Extractables | < 1.2 | % | Internal Method |
| Volatile Matter | < 0.30 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 20.0 | ||
| Styrene/Rubber ratio | 24/76 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 53 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.55 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 17.9 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1200 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ PA612G33-BK | Pier One Polymers, Inc. | Nylon 612 | MAXAMID™ |
| RTP 204A | RTP Company | Nylon 6 | RTP |
| Unilex™ UP.32.955Z | United Polychem | HDPE | Unilex™ |
| Nipol® DN401LL | Zeon Chemicals L.P. | NBR | Nipol® |
| Braskem PE GP 100 BK | Braskem | HDPE | Braskem PE |
