Order Products : sales@su-jiao.com

Addisil™ 462 E

Category:	Rubber , Rubber
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Addisil™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	d415vW_Addisil-462-E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Addisil 4X2 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications. Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odourless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components

Message

The Addisil 4X2 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.

Key Features and Benefits-

High transparency, no yellowing

Excellent mechanical properties

Dry, non-stick surface

Odourless during processing and in its application

Fast curing

Long shelf-life of 6 months for the single component if stored appropriately

Very long pot life of 2 to 4 weeks for the mixed components

General Information
Features	Fast Cure Food Contact Acceptable Heat Cure High Clarity Low to No Odor Non-Stick
Uses	Medical/Healthcare Applications Profiles Tubing
Agency Ratings	BfR Food Contact, Unspecified Rating FDA 21 CFR 177.2600 ISO 10993
Appearance	Clear/Transparent
Processing Method	Extrusion Profile Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.15	g/cm³	DIN 53479

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	60		DIN 53505

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	10.0	MPa	DIN 53504
Tensile Elongation (Break)	520	%	DIN 53504
Tear Strength ¹	36.0	kN/m	ASTM D624

Thermoset	Nominal Value	Unit
Pot Life	20000 to 40000	min
Shelf Life	26	wk
Post Cure Time (200°C)	4.0	hr

Additional Information	Nominal Value	Unit
Vulcanization (175°C)	10.0	min

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom SC7-7022U	Spartech Polycom	PC	Spartech
DENILUB POM NEAT RESIN	Vamp Tech	Acetal (POM) Copolymer	DENILUB
Geon™ Vinyl Flexible B6000	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible
LUVOCOM® 20-7314	Lehmann & Voss & Co.	PPA	LUVOCOM®
Sylvin 8870-70D White 1502	Sylvin Technologies Incorporated	PVC, Semi-Rigid	Sylvin