Order Products : sales@su-jiao.com

ALCUDIA® LDPE PE-017

Category:	LDPE , Low Density Polyethylene
Manufacturer:	REPSOL
Trademark:	ALCUDIA® LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	d3zGrM_ALCUDIA-LDPE-PE-017.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALCUDIA® PE017 is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for extrusion coating and injection moulding applications. This material offers a good balance between easy processability and stiffness. It does not contain any additives. TYPICAL APPLICATIONS Extrusion coating. Injection moulding. Recommended melt temperature range for extrusion coating from 275 to 330°C. Processing conditions should be optimised for each production line.

Message

ALCUDIA® PE017 is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for extrusion coating and injection moulding applications. This material offers a good balance between easy processability and stiffness. It does not contain any additives.

TYPICAL APPLICATIONS

Extrusion coating.

Injection moulding.

Recommended melt temperature range for extrusion coating from 275 to 330°C. Processing conditions should be optimised for each production line.

General Information
Features	Additive Free Food Contact Acceptable Good Processability Good Stiffness
Uses	Coating Applications
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Extrusion Coating Injection Molding

Physical	Nominal Value	Unit	Test Method
Density (23°C)	0.919	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	7.0	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	46		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	10.0	MPa	ISO 527-2
Tensile Strain (Break)	500	%	ISO 527-2
Flexural Modulus	160	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	86.0	°C	ISO 306/A

Extrusion	Nominal Value	Unit
Melt Temperature	275 to 330	°C

Resin Grade	Manufacturer	Category	Trademark
Daplen™ EG340AE	Borealis AG	TPO	Daplen™
Gallonprene® GP210-2504	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
Elastron® V V601.A95.N	Elastron USA, Inc.	TPV	Elastron® V
Karina GRAY PVC COMPOUND 70900-18/229-H-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
LNP™ LUBRILOY™ RF206 compound	SABIC Innovative Plastics Europe	Nylon 66	LNP™ LUBRILOY™