Order Products : sales@su-jiao.com
Miramid® FP20S
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | BASF Leuna GmbH |
| Trademark: | Miramid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | d0sGnc_Miramid-FP20S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Miramid®FP20S is a polyamide 6 (nylon 6) material,. This product is available in Europe, and the processing method is injection molding. Miramid®The main features of FP20S are:
Miramid®The typical application areas of FP20S are: automotive industry |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1070 | -- | kg/m³ | ISO 1183 1 |
| Water Absorption | ISO 62 2 | |||
| Saturation | 7.5 | -- | % | ISO 62 |
| Balance | 2.4 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 1700 | 600 | MPa | ISO 527-2 3 |
| Tensile Stress (Yield) | 45.0 | 30.0 | MPa | ISO 527-2 4 |
| Tensile Strain (Yield) | 5.0 | 20 | % | ISO 527-2 5 |
| Nominal Tensile Strain at Break | > 50 | > 50 | % | ISO 527-2/50 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA 6 | |||
| -30°C | 25.0 | -- | kJ/m² | ISO 179/1eA |
| 23°C | 80.0 kJ/m² | No Break | ISO 179/1eA | |
| Charpy impact strength | ISO 179/1eU 7 | |||
| -30°C | No Break | -- | ISO 179/1eU | |
| 23°C | No Break | No Break | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa) | 50.0 | -- | °C | ISO 75-2 8 |
| Melting Temperature (DSC) | 220 | -- | °C | ISO 3146 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+13 | -- | ohms·m | IEC 60093 9 |
| Dielectric Constant (1 MHz) | 3.40 | -- | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.015 | -- | IEC 60250 10 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 260 - 280 | °C | |
| Mold Temperature | 60.0 - 80.0 | °C |
| Note Message | |
|---|---|
| 1 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 2 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 3 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 4 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 5 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 6 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 7 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 8 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 9 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 10 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNILID 1251 | Tekni-Films, a div of Tekni-Plex | Film, Coated Al Foil | TEKNILID |
| DOW™ HDPE DMDA-8907 NT 7 | The Dow Chemical Company | HDPE | DOW™ HDPE |
| NYLOY® UB-0010N G45N4N | Nytex Composites Co., Ltd. | Nylon, Unspecified | NYLOY® |
| Algoflon® F 7 | Solvay Specialty Polymers | PTFE | Algoflon® |
| Infino XP-2165M | SAMSUNG SDI CO., LTD. | PPS | Infino |
