Order Products : sales@su-jiao.com
RTP 1200 S-55D
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | czMxqr_RTP-1200-S-55D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RTP 1200 S-55D is a thermoplastic polyurethane elastomer (polyester)(TPU-polyester) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.90 | % | ASTM D955 |
| Moisture Content | 0.020 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 58 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 172 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 15.3 | MPa | ASTM D412 |
| 100% strain | 16.2 | MPa | ASTM D412 |
| 300% strain | 35.9 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 41.6 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 560 | % | ASTM D412 |
| Tear Strength 1 | 173 | kN/m | ASTM D624 |
| Compression Set 2(23°C, 22 hr) | 25 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 | °C | |
| Drying Time | 6.0 | hr | |
| Dew Point | -28.9 | °C | |
| Processing (Melt) Temp | 204 - 221 | °C | |
| Mold Temperature | 26.7 - 60.0 | °C | |
| Injection Pressure | 41.4 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TYNE® Olefins W6223 | Tyne Plastics LLC. | PP Homopolymer | TYNE® Olefins |
| AKROMID® B3 GF 30 9 RM-M natural (3292) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| DISTRUMID 6 HI | Distrupol | Nylon 6 | DISTRUMID |
| Larton L K/20 | LATI S.p.A. | PPS | Larton |
| ISPLEN® PM 281 EV | REPSOL | PP Copolymer | ISPLEN® |
