Order Products : sales@su-jiao.com
STYRON™ 656D
| Category: | PS (GPPS) , General Purpose Polystyrene Resin |
| Manufacturer: | Trinseo |
| Trademark: | STYRON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cyilAI_STYRON-656D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
STYRON™ 656D is a general purpose polystyrene with easy flow and good clarity. It is reocmmended for applications where a specific balance of flow and strength are important. Applications:
Complies with:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 8.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 47.6 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 2.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 3240 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 86.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 21 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed | 76.1 | °C | |
| 1.8 MPa, Annealed | 95.0 | °C | |
| Vicat Softening Temperature | 99.0 | °C | ASTM D1525 |
| CLTE - Flow | 7.6E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 1(1.50 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PBT TE5001GU | Sincerity Australia Pty Ltd. | PC+PBT | Sindustris PBT |
| TRISTAR® PC-10R-(IM) | Polymer Technology and Services, LLC | PC | TRISTAR® |
| CERTENE™ EDF-230A | Muehlstein | EVA | CERTENE™ |
| Colorite 11 Series 7811 | Colorite Polymers | PVC, Unspecified | Colorite 11 Series |
| ALCOM® PA66 910/1.1 CF15 GF20 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
