| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Putsch Kunststoffe GmbH |
| Trademark: | FORMULA P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cv2tYT_FORMULA-P-ELAN-5210-M2.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| FORMULA P ELAN 5210 M2 is a polypropylene product,. It is available in Europe. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.980 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 15 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.2 - 1.4 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 17.0 | MPa | ISO 527-2 |
| Fracture | 18.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 500 | % | ISO 527-2 |
| Flexural Modulus | 1400 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 46.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -20°C | 5.0 | kJ/m² | ISO 180 |
| 23°C | 30 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 64.0 | °C | ISO 306/B |
| Additional Information |
|---|
| Tensile Strength, ISO 527: 18 MPa |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 - 240 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Urochem 191 | Chemiplastica, Inc. | Urea Formald | Urochem |
| Geon™ Vinyl Flexible R5160A | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Hytrel® HTR4275 BK316 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| Adflex 7636 XCP | LyondellBasell Industries | Polyolefin, Unspecified | Adflex |
| Sylvin 4260-80 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |