Order Products : sales@su-jiao.com
INEOS PP L12N-00
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cud0Sn_INEOS-PP-L12N-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| L12N-00 is a medium melt flow rate, nucleated impact copolymer polypropylene for injection molding and compounding applications. It is especially formulated for high impact resistance, high flexural modulus, and excellent gloss. Applications include automotive, consumer products, housewares, and compounding. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.903 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 88 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 25.8 | MPa | |
| Break | 18.1 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 6.0 | % | |
| Break | 120 | % | |
| Flexural Modulus - 1% Secant | 1260 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 64 | J/m | |
| 23°C | 300 | J/m | |
| Notched Izod Impact (Area) | ASTM D256 | ||
| -20°C | 6.00 | kJ/m² | |
| 23°C | 30.1 | kJ/m² | |
| Instrumented Impact, Ductility | ASTM D3763 | ||
| -20°C | Ductile | ||
| 23°C | Ductile |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 102 | °C | |
| 1.8 MPa, Unannealed | 53.3 | °C | |
| Vicat Softening Temperature | 148 | °C | ASTM D1525 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss (60°) | 74 | ASTM D2457 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NYLOY® UB-0010N G45N3N | Nytex Composites Co., Ltd. | Nylon, Unspecified | NYLOY® |
| apilon 52® MS 59 | API SpA | TPU-Polyester | apilon 52® |
| ESTAPROP KUR 0640 TG | Cossa Polimeri S.r.l. | PP Copolymer | ESTAPROP |
| DuraGrip® DGR 6060NC | Advanced Polymer Alloys | TPE | DuraGrip® |
| JSR EPR EP51 | JSR Corporation | EPDM | JSR EPR |
