Order Products : sales@su-jiao.com

ELITE™ AT 6402

Category:	EPE , Enhanced Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	ELITE™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cuGLNZ_ELITE-AT-6402.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ELITE™ AT 6402 Enhanced Polyethylene Resin is an ethylene/octene-1 copolymer suitable for the production of blown film requiring good sealing and toughness with good stiffness and temperature resistance.

Main Characteristics

Fully Formulated with Slip, Antiblock and Processing Aid

High Hot Tack and Seal Strength

Broad Hot Tack and FFS Packaging Window

Excellent Stiffness and Toughness Properties

High Throughput Resin with Excellent Bubble Stability

Complies with:

U.S. FDA FCN 424

EU, No 10/2011

Canadian HPFB No Objection

Consult the regulations for complete details.

General Information
Additive	Processing aid Anti-caking agent (1875 ppm) Sliding agent (750 ppm)
Agency Ratings	FDA FCN 424 HPFB (Canada) No Objection Europe 10/1/2011 12:00:00 AM
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.913	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.85	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	25	µm
Film Puncture Energy (25 µm)	3.32	J	Internal method
Film Puncture Force (25 µm)	48.0	N	Internal method
Film Puncture Resistance (25 µm)	16.5	J/cm³	Internal method
Secant Modulus - 2% Secant, MD (25 µm)	118	MPa	ASTM D882
Dart Drop Impact (25 µm)	570	g	ASTM D1709
Elmendorf Tear Strength - MD ¹(25 µm)	230	g	ASTM D1922

Thermal	Nominal Value	Unit	Test Method
Melting Temperature (DSC)	107	°C	Internal method

Optical	Nominal Value	Unit	Test Method
Haze (25.4 µm)	7.4	%	ASTM D1003

Extrusion instructions
Fabrication Conditions For Blown Film: Monolayer Film (1mil) Screw Size: 2in ; 30:1ratio L/D Die Gap: 78mil (2 mm) Output: 11.3 lb/hr/in. of die circumference Die Diameter: 9.86 in. Blow-Up Ratio: 2.5 to 1 Frost Line Height: 36 in.

Note Message
1 .	Method B

Resin Grade	Manufacturer	Category	Trademark
RTP 1000 TFE 2	RTP Company	PBT	RTP
Monprene® OM-10268	Teknor Apex Company	TPE	Monprene®
Braskem PP TI4900M	Braskem America Inc.	PP Impact Copolymer	Braskem PP
EPLAMID 66 GFT 30 NC	EPSAN Plastik SAN. ve TiC. A.S.	Nylon 66	EPLAMID 66
LUVOCOM® 1301-8558	LEHVOSS Group	PPS	LUVOCOM®