Order Products : sales@su-jiao.com

ALCUDIA® HDPE R4805

Category:	HDPE , High Density Polyethylene
Manufacturer:	REPSOL
Trademark:	ALCUDIA® HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	crbkgw_ALCUDIA-HDPE-R4805.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALCUDIA® R4805 is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of tapes with high tensile strength at break. TYPICAL APPLICATIONS ALCUDIA® R4805 is designed for stretched tapes production based on blown film. It gives flexible tapes with high tenacity and low fibrillation tendency suitable for: Iso Mayer textile applications Raschel knitted and woven fabrics. Twines and ropes Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line.

Message

ALCUDIA® R4805 is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of tapes with high tensile strength at break.

TYPICAL APPLICATIONS
ALCUDIA® R4805 is designed for stretched tapes production based on blown film. It gives flexible tapes with high tenacity and low fibrillation tendency suitable for:

Iso Mayer textile applications

Raschel knitted and woven fabrics.

Twines and ropes

Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line.

General Information
Features	High tensile strength Workability, good Low liquidity Compliance of Food Exposure Medium wide molecular weight distribution
Uses	Twine Films Strap Rope Fabric
Agency Ratings	European food contact, not rated
Processing Method	Blow film

Physical	Nominal Value	Unit	Test Method
Density	0.948	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.56	g/10 min	ISO 1133

Extrusion	Nominal Value	Unit
Melt Temperature	180 - 230	°C

Extrusion instructions
Blow Up Ratio: 1.1 to 1.3

Resin Grade	Manufacturer	Category	Trademark
tefabloc® TO 628	Mitsubishi Chemical Performance Polymers, Inc.	SEBS	tefabloc®
Nirion F30	Soredi S.p.a.	PC	Nirion
ExxonMobil™ LDPE LD 600BA	ExxonMobil Chemical	LDPE	ExxonMobil™ LDPE
ECOGRAN® PP 50/50	Eurocompound Polymers	PP, Unspecified	ECOGRAN®
Sylvin 2960-80 White 1500	Sylvin Technologies Incorporated	PVC, Flexible	Sylvin