Order Products : sales@su-jiao.com
NEFTEKHIM PE 6152C (526H3)
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Nizhnekamskneftekhim Inc. |
| Trademark: | NEFTEKHIM PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | coSAO8_NEFTEKHIM-PE-6152C-526H3-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts. Stabilization recipe: antacid, antioxidant, thermostabilizer, processing aid, dispersing agent. Application: general purpose blown film, high strength. Technical requirements: TU 2211-145-05766801-2008 |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 to 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.25 to 0.40 | g/10 min | ASTM D1238 |
| Gel Content 1 | 600 | pcs/m² | |
| Melt Flow Ratio - MFR 21.6 kg/MFR 5.0 kg | > 20.0 | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| 2% Secant, MD | 900 | MPa | |
| 2% Secant, TD | 800 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 55.0 | MPa | |
| TD : Yield | 48.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 450 | % | |
| TD : Break | 550 | % | |
| Dart Drop Impact | 150 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 13 | g | |
| TD | 60 | g |
| Note Message | |
|---|---|
| 1 . | p.6 Attachment A TU 2211-14505766801 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PH 52 T 20 | Plastcom | PP, Unspecified | SLOVALEN® |
| ACCUTECH™ HP0336G10M20CL | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| Epoxies, Ect. 60-7159 | Epoxies, Etc. | Acrylic, Unspecified | Epoxies, Ect. |
| LACTEL® 80:20 DL-PLCL | DURECT Corporation | PCL | LACTEL® |
| INSULGEL 50 FC Black | ITW Polymers Coatings North America | Epoxy | INSULGEL |
