Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion LR840
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cnEPtn_Geon-Vinyl-Rigid-Extrusion-LR840.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™ Vinyl Rigid Extrusion LR840 is a Rigid Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. Primary characteristic: eco-friendly/green. |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 23°C) | > 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2340 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 39.3 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 160 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| -18°C, 3.18 mm, Injection Molded | 160 | J/m | |
| 0°C, 3.18 mm, Injection Molded | 750 | J/m | |
| 23°C, 3.18 mm, Injection Molded | 910 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 3.18 mm) | 68.3 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | Type I, 5.1 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trademark PE LLH1918 | Trademark Plastics Corporation | LLDPE | Trademark PE |
| Mylar® EL (200 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Hostaform® XGC10 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| LUVOCOM® 1105/TF/20/BN | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| POLYCASA® ACRYL KR 2007/1 | Polycasa | Acrylic (PMMA) | POLYCASA® ACRYL |
