Order Products : sales@su-jiao.com
Formolene® 2613N
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cmxKvW_Formolene2613N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 2613N is a copolymer polypropylene designed for heavy duty injection molding applications. It offers advantages in both processing and physical properties over many polypropylenes used for pails, crates and other rugged, injection molded applications. Formolene® 2613N meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. This material is free of animal-derived content. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 23.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1130 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| -30°C, injection molding | 74 | J/m | ASTM D256A |
| -18°C, injection molding | 120 | J/m | ASTM D256A |
| 23°C, injection molding | 530 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 100 | °C | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 54.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime Tuff-X 200 | Primex Plastics Corporation | Unspecified | Prime Tuff-X |
| Staramide AST03 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| MORETEC™ 0358CN | Prime Polymer Co., Ltd. | LLDPE | MORETEC™ |
| SEQUEL® 1440-UV R1K3 | LyondellBasell Industries | PP, Unspecified | SEQUEL® |
| LNP™ THERMOCOMP™ JF004P compound | SABIC Innovative Plastics | PESU | LNP™ THERMOCOMP™ |
