Order Products : sales@su-jiao.com
RTP 2285 A
| Category: | PEK , Polyether Ketone |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ciq565_RTP-2285-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Carbon Fiber |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.050 | % | ASTM D955 |
| Moisture Content | 0.10 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 30 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 26200 | MPa | ASTM D638 |
| Tensile Strength | 262 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 1.6 | % | ASTM D638 |
| Flexural Modulus | 24800 | MPa | ASTM D790 |
| Flexural Strength | 379 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 80 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.20 mm) | 750 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | > 316 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | < 1.0E+5 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm, ** Values per RTP Company testing.) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 179 | °C | |
| Drying Time | 2.0 | hr | |
| Dew Point | -28.9 | °C | |
| Processing (Melt) Temp | 385 - 413 | °C | |
| Mold Temperature | 179 - 218 | °C | |
| Injection Pressure | 68.9 - 138 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP 578N | Saudi Basic Industries Corporation (SABIC) | PP Homopolymer | SABIC® PP |
| STYRON™ 470 | Trinseo | PS (HIPS) | STYRON™ |
| VAMPEEK B 0024 | Vamp Tech | PEEK | VAMPEEK |
| APEX® 93-A0591C-97 | Teknor Apex Company | PVC, Flexible | APEX® |
| EMLON® 66 GFR 15 IM | EMAS Plastik San.Tic.AS. | Nylon 66 | EMLON® |
