Order Products : sales@su-jiao.com
MORETEC™ 00138H
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Prime Polymer Co., Ltd. |
| Trademark: | MORETEC™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ch35FN_MORETEC-00138H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MORETEC™00138H is a linear low density polyethylene product,. It can be processed by blowing film and is available in North America, Europe or Asia Pacific. MORETEC™The application areas of 00138H include packaging, film and coating applications. Features include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.3 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | > 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 54 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 9.80 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 300 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 190 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength (Injection Molded) | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 103 | °C | ISO 306 |
| Melting Temperature (DSC) | 119 | °C | ISO 3146 |
| Additional Information |
|---|
| The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357-3Tensile Strain at Break, ISO 527: >300% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adiprene® L 325 | Chemtura | PUR-Ether/TDI | Adiprene® |
| Celcon® M90-45H | Celanese Corporation | Acetal (POM) Copolymer | Celcon® |
| Cheng Yu FV30720 | Cheng Yu Plastic Company Limited | Acetal (POM) Homopolymer | Cheng Yu |
| LUVOCOM® 80-8222 | Lehmann & Voss & Co. | Acetal (POM) Copolymer | LUVOCOM® |
| Toyolac® 100G-30 | Toray Resin Company | ABS | Toyolac® |
