Order Products : sales@su-jiao.com
RheTech Polypropylene T15P200-01BG
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | RheTech, Inc. |
| Trademark: | RheTech Polypropylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cgxaC4_RheTech-Polypropylene-T15P200-01BG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 15% Talc Reinforced, Polypropylene Copolymer, Black, Blow Molding Grade |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 30.3 | MPa | ASTM D638 |
| Flexural Modulus | 1860 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 100 | J/m | ASTM D256 |
| Dart Drop Impact | 13.6 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 113 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 62.2 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 196 - 207 | °C | |
| Middle Temperature | 188 - 199 | °C | |
| Front Temperature | 171 - 182 | °C | |
| Nozzle Temperature | 193 - 204 | °C | |
| Mold Temperature | 26.7 - 48.9 | °C | |
| Injection Pressure | 2.76 - 10.3 | MPa | |
| Injection Rate | Moderate | ||
| Holding Pressure | 2.07 - 8.27 | MPa | |
| Back Pressure | 0.345 - 1.03 | MPa |
| Injection instructions |
|---|
| Injection Speed: moderateScrew RPM: recovery 3 seconds before mold opensCycle Time: variable, application dependent |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adell Polyamide AJ-34 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| Elastollan® A C 85 A | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| LNP™ THERMOCOMP™ 9X07430 compound | SABIC Innovative Plastics | PC+PBT | LNP™ THERMOCOMP™ |
| Plaslube® AC-81/TF/15 NAT | Techmer Engineered Solutions | Acetal (POM) Homopolymer | Plaslube® |
| CYCOLOY™ CX2244ME resin | SABIC Innovative Plastics | PC+ABS | CYCOLOY™ |
