Order Products : sales@su-jiao.com

NuSil R-3900

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cgoOcM_NuSil-R-3900.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Coatings Comment: Cure: 8 h/25°C : 45 m/75°C : 135 m/150°C, Dispersion Coating, 20% Solids

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Coatings

Comment: Cure: 8 h/25°C : 45 m/75°C : 135 m/150°C, Dispersion Coating, 20% Solids

General Information
Features	Electrically Conductive Fuel Resistant
Uses	Aircraft Applications Coating Applications Electrical/Electronic Applications

Physical	Nominal Value	Unit
Solids Content	20	%

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-50 to 200	°C

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Uncured Properties	Nominal Value	Unit
Color	Translucent
Viscosity	1.9	Pa·s
Curing Time
75°C	0.75	hr
25°C	8.0	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	50
Tensile Strength	8.27	MPa
Tensile Elongation at Break	900	%
Tear Strength	48.2	kN/m

Resin Grade	Manufacturer	Category	Trademark
TECHNIACE® F-101	Nippon A&L Inc.	PC+ABS	TECHNIACE®
MTM® 22S	Cytec Industries Inc.	Polyester, TS	MTM®
TOTAL Polystyrene Impact 3450	TOTAL Refining & Chemicals	PS (HIPS)	TOTAL Polystyrene
Ad-Tech Epoxy EC-408	Ad-Tech Plastic Systems Corp.	Epoxy	Ad-Tech Epoxy
EvoSource™ ABS 4500	MBA Polymers	ABS	EvoSource™