Order Products : sales@su-jiao.com
SUSTAPEI MG
| Category: | PEI , Polyether Imide |
| Manufacturer: | Röchling Sustaplast SE & Co. KG |
| Trademark: | SUSTAPEI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cg6RTC_SUSTAPEI-MG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Product characteristics
Typical fields of application
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.27 | g/cm³ | ISO 1183 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.50 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 86 | ISO 868 | |
| Ball Indentation Hardness | 220 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3100 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 110 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 12 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 200 | °C | ISO 75-2/A |
| Continuous Use Temperature | |||
| -- 1 | -50.0 to 170 | °C | |
| -- 2 | < 210 | °C | |
| CLTE - Flow | 4.5E-5 | cm/cm/°C | DIN 53752 |
| Specific Heat | 1100 | J/kg/°C | DIN 52612 |
| Thermal Conductivity | 0.24 | W/m/K | DIN 52612 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric Constant | 3.20 | IEC 60250 | |
| Dissipation Factor (50 Hz) | 1.5E-3 | IEC 60250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | V-0 | ||
| 6.00 mm | V-0 |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | Short Term |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FL 34 E | Versalis S.p.A. | LDPE | Riblene® |
| Pro-fax HP530L | INDELPRO, S.A. de C.V. | PP Homopolymer | Pro-fax |
| Promyde® B15 P | NUREL, S.A. | Nylon 6 | Promyde® |
| Terlux® HD 2812 | INEOS Styrolution Group GmbH | MABS | Terlux® |
| LNP™ THERMOTUF™ V1000SU compound | SABIC Innovative Plastics | Nylon, Unspecified | LNP™ THERMOTUF™ |
