Order Products : sales@su-jiao.com

THERMOLAST® M TM7MED (Series: MC/tl)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® M
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cexN6M_THERMOLAST-M-TM7MED-Series-MC-tl-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The MC/tl Series is your material solution for applications requiring basic medical approvals such as ISO 10993-5. The compounds are produced exclusively by a special medical unit and available in translucent colors.

Typical applications

Flexible Connections

Mouthpieces

Seals

Soft touch

Valves

Material advantages

Adhesion to PP

DMF listed

Excellent compression set

For injection molding and extrusion

Free of animal basedingredients

KRAIBURG TPE Medical service package (description below)

Sterilizable (autoclave 134°C, gammaradiation 2x35 kGy, EtO)

Tested according to ISO 10993-5

General Information
Features	Autoclave Sterilizable Ethylene Oxide Sterilizable Good Adhesion No Animal Derived Components Radiation Sterilizable
Uses	Connectors Medical/Healthcare Applications Seals Soft Touch Applications Valves/Valve Parts
Agency Ratings	DMF 22979 ISO 10993 Part 5
Appearance	Translucent
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.890	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	68		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	13.0	MPa	ISO 37
Tensile Elongation ²(Break)	800	%	ISO 37
Tear Strength ³	24	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	30	%
70°C, 24 hr	38	%
100°C, 24 hr	55	%

Extrusion	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Cylinder Zone 1 Temp.	160	°C
Cylinder Zone 2 Temp.	180	°C
Cylinder Zone 3 Temp.	200	°C
Die Temperature	200 to 230	°C

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
Manner Flexible PVC X3507	Manner Plastics, L.P.	PVC, Flexible	Manner Flexible PVC
Sylvin 2920-60 Clear	Sylvin Technologies Incorporated	PVC, Flexible	Sylvin
Europrene® SOL R C2525	Versalis S.p.A.	SBR, Solution	Europrene®
Orevac® 18334	Arkema	LLDPE	Orevac®
Polifor® 20 CA/40 H-D BIANCO 0343	SO.F.TER. SPA	PP Homopolymer	Polifor®