Order Products : sales@su-jiao.com
GAPEX® HT RNP43MU04AL
| Category: | Nylon+PP , Polyamide + PP |
| Manufacturer: | Ferro Corporation |
| Trademark: | GAPEX® HT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | caxEQ6_GAPEX-HT-RNP43MU04AL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GAPEX®HT RNP43MU04AL is a polyamide + PP (nylon + PP) material, which contains a 43% glass fiber reinforced material. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,. GAPEX®The main characteristics of HT RNP43MU04AL are heat resistance. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (275°C/5.0 kg) | 8.4 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.30 | % | ASTM D955 |
| Transverse flow | 0.80 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 143 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 7.5 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| 1% secant : 23°C | 945 | MPa | ASTM D790 |
| Tangent : 23°C | 986 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 203 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 710 | J/m | ASTM D256 |
| Dart Drop Impact | 0.520 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 257 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 242 | °C | ASTM D648 |
| Additional Information |
|---|
| Filler Content, ASTM D2584: 42.6% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resinoid 1323 | Resinoid Engineering Corporation | Phenolic | Resinoid |
| VESTAKEEP® i4 R | Evonik Industries AG | PEEK | VESTAKEEP® |
| ASI POLYETHYLENE LP 552-01 | A. Schulman Inc. | HDPE Copolymer | ASI POLYETHYLENE |
| Lupoy® SR3108FC | LG Chem Ltd. | PC | Lupoy® |
| Iupital® A10-03 | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
