Category: | LDPE , Low Density Polyethylene |
Manufacturer: | Entec Polymers |
Trademark: | Hypel® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | cZFZsM_Hypel-PELD8-920.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Hypel® PELD8/.920 is a Low Density Polyethylene material. It is available in North America. Primary attribute of Hypel® PELD8/.920: RoHS Compliant. |
General Information | |
---|---|
Features |
|
RoHS Compliance |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
Molding Shrinkage - Flow (3.18 mm) | 1.5 to 4.5 | % | ASTM D955 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength | ASTM D638 | ||
Yield, 23°C | 10.3 | MPa | |
Break, 23°C | 11.4 | MPa | |
Tensile Elongation (Break, 23°C) | 110 | % | ASTM D638 |
Flexural Modulus - 2% Secant (23°C) | 185 | MPa | ASTM D790 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Vicat Softening Temperature | 92.8 | °C | ASTM D1525 1 |
Note Message | |
---|---|
1 . | Rate A (50°C/h), Loading 1 (10 N) |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Staramide RF00ASXS | Eurostar Engineering Plastics | Nylon 66 | Staramide |
TPV Elastoprene® N73A-S | ELASTORSA Elastomeros Riojanos S.A. | PP+EPDM | TPV Elastoprene® |
UNINOR® PPO Modified | Nytef Plastics, Ltd. | PPE+PS | UNINOR® |
Dryflex® 885128 | ELASTO | SEBS | Dryflex® |
LUVOCOM® 1/CF/30/TF/13/SI/2/BK | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |