Order Products : sales@su-jiao.com
Rigid Cast RC-8017
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | BJB Enterprises, Inc. |
| Trademark: | Rigid Cast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cYULby_Rigid-Cast-RC-8017.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RIGID-CAST 8017 A/B is a rigid, 80 Shore D, two-component high impact and high strength castable urethane. RC-8017 A/B has been designed to meet a wide variety of part making applications that range from electronic enclosures to mechanical parts. This system is very light in color and its translucency makes it extremely easy to color. RC-8017 A/B can also be demolded in one hour or less, depending on part thickness and mold conditions. The RC-8017 A/B has a work time of approximately 60 seconds and meter mix dispensing equipment is recommended for processing. BJB offers meter mix dispensing equipment ranging from hand operated static mix systems to air-power operated production systems. Call BJB's technical representatives to provide processing information assistance. Product Highlights:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.04 | g/cm³ | |
| -- 2 | 1.19 | g/cm³ | |
| -- | 1.12 | g/cm³ | ASTM D792 |
| Shrinkage | |||
| -- 3 | 0.40 | % | |
| -- 4 | 0.20 | % |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time | 0.9 - 1.1 | min | |
| Work Time 5 | 0.9 - 1.1 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cure Time (25°C) | 5.0 - 7.0 | day |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 78 - 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1860 | MPa | ASTM D638 |
| Tensile Strength | 46.9 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 14 | % | ASTM D638 |
| Flexural Modulus | 1520 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 57.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 56 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 71.1 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 60.0 | °C | ASTM D648 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 100, mixing ratio by capacity: 100 | ||
| Component B | Mixing ratio by weight: 88, mixing ratio by capacity: 100 | ||
| Thermoset Mix Viscosity | Brookfield | ||
| 25°C 6 | 550 | cP | Brookfield |
| 25°C 7 | 1300 | cP | Brookfield |
| 25°C | 900 | cP | Brookfield |
| 43°C 8 | 350 | cP | Brookfield |
| 43°C | 400 | cP | Brookfield |
| Demold Time 9 | 40 - 60 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| In order to achieve maximum physical properties, a post cure with heat is required. BJB recommends 24 hours at ambient temperature, 77°F (25°C), followed by 16 hours at 180°F (82°C). Support of the part may be required to prevent part deformation during heat cure. |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| 3 . | Post-cured, 12" x 1/2" x 1/4" |
| 4 . | 7-day ambient cure, 12" x 1/2" x 1/4" |
| 5 . | 100g mass |
| 6 . | Part A |
| 7 . | Part B |
| 8 . | Part B |
| 9 . | 2.2 mm thick, closed mold |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Selvol™ WS-724 | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| Sylvin 8757-60LG Natural | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| TECHLEN M3261 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| Baydur® 426 IMR (Continuous Filament Mat) | Covestro - PUR | PUR-MDI | Baydur® |
| Sylvin 6177-80 Orange 597 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
