Order Products : sales@su-jiao.com
DENILUB Y 30G 0Mo
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Vamp Tech |
| Trademark: | DENILUB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cWWidH_DENILUB-Y-30G-0Mo.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PA 66 30% glass fiber reinforced with molybdenum disulfide. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.50 | % | |
| Across Flow | 1.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 9000 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 170 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.5 | % | ASTM D638 |
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.35 | ||
| Static | 0.42 | ||
| Wear Factor 1 | 40.0 | 10^-10 m³ h/N·m·h |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 8.0 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | 65 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 250 | °C | ASTM D648A |
| Note Message | |
|---|---|
| 1 . | Thrust Washer |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™-C TFC77 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| Ducor® 2500 H | Ducor Petrochemicals BV | PP Impact Copolymer | Ducor® |
| ADVANCENE™ EM-5204-UVH | ETHYDCO | HDPE | ADVANCENE™ |
| Starex VH-0815 | LOTTE ADVANCED MATERIALS CO., LTD. | ABS | Starex |
| Moplen EP300K | LyondellBasell Industries | PP Impact Copolymer | Moplen |
